Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear window regulator mechanism of the BMW 3 Series.

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013

The following steps will show us how to disassemble and replace the rear window regulator mechanism of the BMW 3 Series. First, we open the rear door of the car and start disassembling and removing the door panel, unscrewing all the fastening screws; then we disconnect the mechanism from the side window, gently removing it, as shown in the video. At this point, we disconnect the mechanism from the motor, disconnecting the electrical connector; we carry out the repair of the window regulator or the replacement, following the video tutorial until the end!

Posted on 2 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Window Regulator Mechanism
Removing the Window Regulator Mechanism
BMW Serie 3 (1998-2006 / E46) To remove the window regulator mechanism, first, you need to take off the door panel by removing the corresponding mounting screws (under the handle …
Removing the Rear Side Window of the BMW 3 Series
Removing the Rear Side Window of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide briefly outlines the steps necessary to remove and replace the rear side window of the BMW 3 Series. First, open the rear door and begin r…
How to reset the window regulator motor of the BMW Series 3.
How to reset the window regulator motor of the BMW Series 3.
BMW Serie 3 (1998-2006 / E46) Today's instructions will show us how to reset the window regulator motor of the BMW Series 3. First, let's get inside the vehicle and start by turni…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos