Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Side Window of the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Side window

See other generations:
Video tutorial

This guide briefly outlines the steps necessary to remove and replace the rear side window of the BMW 3 Series. First, open the rear door and begin removing the door panel by unscrewing all the fastening screws and disconnecting the power connector for the window switch; then, release the window regulator mechanism by unscrewing the bracket screws to lift the glass and remove it, as shown in the video.

At this point, install the new side window by securing it to the window motor bracket; finally, ensure that the window closes perfectly!


Updated on 16 July 2026 by ScegliAuto


Related tutorials

Replacement of the rear window regulator mechanism of the BMW 3 Series.
Replacement of the rear window regulator mechanism of the BMW 3 Series.
BMW Serie 3 (2005-2013 / E92, E90, E91) The following steps will show us how to disassemble and replace the rear window regulator mechanism of the BMW 3 Series. First, we open the rear door…
How to Remove and Install the Rear Window Seal on a BMW 3 Series
How to Remove and Install the Rear Window Seal on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) How to remove and install the rear window seal on a BMW 3 Series? Don't worry, let's see together in this video how to proceed. Start the removal: ta…
How to replace the side window seal of the BMW Series 3.
How to replace the side window seal of the BMW Series 3.
BMW Serie 3 (1998-2006 / E46) Below we will discover the necessary instructions that will allow us to disassemble and replace the side window seal of the BMW Series 3. To remove t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos