Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the interior door handle of the BMW Series 3.

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Handle

Today we will explain how to independently replace the interior door handle of a BMW Series 3. To carry out the replacement of the handle, we need to remove the cover of the handle using a plastic removal tool or by inserting a metal card and a small flathead screwdriver inside the handle. We unscrew the screws located at the back of the handle and detach the door panel. We disconnect the connector and place the panel on a work surface to release the locking screw of the handle. After removing the screws, the handle will come off, and if necessary, we can use an electric screwdriver for disassembly. We install the new handle and reassemble the door panel.

Posted on 12 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Handle on a BMW 3 Series
How to Replace the Interior Handle on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) In today's video, you will learn how to replace the interior handle on the door panel of a BMW 3 Series. This guide also applies to other contemporar…
How to Replace the Adhesive Cover of the Interior Handle on a BMW 3 Series
How to Replace the Adhesive Cover of the Interior Handle on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today, learn how to replace the adhesive cover of the interior handle on a BMW 3 Series yourself. To perform this simple task, get inside the vehicle…
How to Replace the Interior Handle of a BMW 3 Series?
How to Replace the Interior Handle of a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the interior handle of a BMW 3 Series, remove the trim piece that runs along the panel and loosen all the screws underneath it. Perform th…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - Why is the door handle of the BMW E90 locked? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos