Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Interior Door Handle on a BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Handle

See other generations:
Video tutorial

Today's steps will show you how to remove and replace the interior door handle on the front door of a BMW 3 Series. First, open the front or rear door and start removing the door panel by unscrewing all the fastening screws and disconnecting the electrical connectors found at the back.

Then, pry off the plastic cover of the handle to remove it, unscrewing the screws located on the back to take out and replace the entire handle, as shown in the video. Now, reassemble all the handle components and finally the door panel!


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to replace the interior door handle of the BMW Series 3.
How to replace the interior door handle of the BMW Series 3.
BMW Serie 3 (2012-2019 / F31, F30) Today we will explain how to independently replace the interior door handle of a BMW Series 3. To carry out the replacement of the handle, we need to…
How to Replace the Door Handle on the BMW 3 Series
How to Replace the Door Handle on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) These brief and simple instructions will show you the procedure for removing and replacing the inner door handle of the front door on the BMW 3 Serie…
How to Remove the Inner Door Handle on a BMW 3 Series
How to Remove the Inner Door Handle on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you begin, open the door of your BMW 3 Series. Start by removing and detaching the door panel, prying out and removing the inserts, then unscr…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos