Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Door Handle on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Handle

See other generations:
Video tutorial

Before you begin, open the door of your BMW 3 Series. Start by removing and detaching the door panel, prying out and removing the inserts, then unscrew the fastening screws and disconnect the electrical connectors.

After that, release the cable connected to the inner handle. At this point, unclip the clips that secure the handle to the door panel.

Once you complete this step, pull the handle out from the door panel, and you will have finished the removal.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Replacing the Interior Door Handle on a BMW 3 Series
Replacing the Interior Door Handle on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today's steps will show you how to remove and replace the interior door handle on the front door of a BMW 3 Series. First, open the front or rear doo…
How to Replace the Door Handle on the BMW 3 Series
How to Replace the Door Handle on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) These brief and simple instructions will show you the procedure for removing and replacing the inner door handle of the front door on the BMW 3 Serie…
How to replace the interior door handle of the BMW Series 3.
How to replace the interior door handle of the BMW Series 3.
BMW Serie 3 (2012-2019 / F31, F30) Today we will explain how to independently replace the interior door handle of a BMW Series 3. To carry out the replacement of the handle, we need to…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos