Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Valve Cover Gasket

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Engine

For the vehicle in question, the valve cover gasket consists of two pieces: a central one and the perimeter gasket of the cover itself. Once the gaskets are seated in their corresponding slots on the cover, before positioning it, apply gasket sealant at the edges of the side covers to ensure better sealing and adhesion. Proceed to position the cover and tighten the respective fastening bolts in a crisscross pattern using a torque wrench. After starting the engine, check for any leaks or seepage.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Valve Cover Gasket Replacement
Valve Cover Gasket Replacement
BMW Serie 3 (2005-2013 / E91, E90, E92) To remove and lift the valve cover, first completely disassemble the cabin air filter housing and stabilizer bars; continue by freeing the wiring har…
How to Replace the Valve Cover of the BMW 3 Series?
How to Replace the Valve Cover of the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To remove the valve cover of the BMW 3 Series, open the hood to access the engine compartment and remove the upper cover. Once this is removed, you w…
Valve Cover Gasket Replacement
Valve Cover Gasket Replacement
BMW Serie 3 (1998-2006 / E46) Start by disconnecting the plastic cable pass-through located just below the windshield to remove the cabin air filter and disassemble the supporting…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos