Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Steering Angle Sensor on a BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006

This guide will show you how to remove and replace the steering angle sensor on a BMW 3 Series. First, get inside the vehicle and start by removing the steering wheel and its airbag. To do this, press on the rear holes to release the airbag (disconnecting the electrical connector), then unscrew the central screw of the steering wheel. Once the steering wheel is removed, you can take out the steering angle sensor by disconnecting the wiring. Replace it with the new original one, then reassemble the steering wheel and the airbag!

Posted on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Steering Angle Sensor on a BMW 3 Series
How to Replace the Steering Angle Sensor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) .. you will learn the procedure for removing and replacing the steering angle sensor on a BMW 3 Series. First, get inside the vehicle and remove the plastic.. …
How to reset the steering angle sensor in the BMW 3 Series?
How to reset the steering angle sensor in the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In this tutorial, you will see how to reset the steering angle sensor in the BMW 3 Series, a very simple and quick operation. To do this, you will ne…
Steering Angle Sensor Replacement
Steering Angle Sensor Replacement
BMW Serie 3 (1998-2006 / E46) The steering angle sensor for this vehicle model is a potentiometer with sliding contacts located along the steering column at the rear. Because it h…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos