Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the headlight bulb of the BMW 3 Series?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Headlight bulb

The procedure for replacing the bulb in the BMW 3 Series involves opening the hood, in order to have access to the components inside the engine compartment: here it will be possible to detach the internal covering of the corresponding optical group. Once this has been removed, it will be possible to locate the bulb inside: this must be disconnected from the appropriate connector, so that the new replacement part can be connected to it. After the replacement, it will be possible to close the optical group and verify that everything is working.

Posted on 29 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a BMW 3 Series
How to Replace the Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the headlight bulb on a BMW 3 Series, remove the bolts securing the front wheel corresponding to the bulb you need to replace. Once the wh…
Replacement of the front headlight bulb of the BMW 3 Series
Replacement of the front headlight bulb of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Following these simple steps, we will see how to disassemble and replace the low beam or high beam bulb of the front headlight of the BMW 3 Series. F…
How to replace the front headlight bulb of the BMW 3 Series
How to replace the front headlight bulb of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today we will explain how to replace the headlight bulb of the BMW 3 Series model E92, produced from 2005 to 2013. To replace the bulb, we need to op…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos