Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Headlight bulb

See other generations:
Video tutorial

Following these simple steps, we will see how to disassemble and replace the low beam or high beam bulb of the front headlight of the BMW 3 Series. First of all, open the hood of the car and start by disconnecting the electrical connector of the bulb, releasing the bulb holder to remove it along with the low beam bulb; then remove the halogen bulb, as shown in the video.

At this point, install the new front headlight bulb, of the correct type and with the same fitting; reassemble the bulb holder and finally make the electrical connection of the light!


Posted on 12 December 2024 by ScegliAuto


Related tutorials

How to disassemble and replace the headlight bulb of the BMW 3 Series
How to disassemble and replace the headlight bulb of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) These short and simple instructions will guide us through the process of disassembling and replacing the headlight bulb of the BMW 3 Series. First, l…
How to Replace the Headlight Bulb on a BMW 3 Series
How to Replace the Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) To replace the headlight bulb on a BMW 3 Series, access the inner part of the corresponding wheel well: here you will find a headlight protection pan…
Replacing the Xenon Headlight Bulb on a BMW 3 Series F30/F31
Replacing the Xenon Headlight Bulb on a BMW 3 Series F30/F31
BMW Serie 3 (2012-2019 / F31, F30) In this video, we will see how to replace the headlight bulb on a BMW 3 Series if it burns out, ensuring safe driving. To replace it, lift the side c…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos