Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Xenon bulbs in the front headlight of the BMW 3 Series F30/31.

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Headlight bulb

In this video, we see how, if the headlight lamp of the BMW 3 Series were to burn out, we need to replace it in order to drive safely. To replace it, we need to lift the side corresponding to the headlight that contains the burnt-out lamp, remove the front wheel, inside the wheel arch we will find a panel, once removed we can access the back of the headlight. Rotate the headlamp cover, release the metal clip and disconnect the electrical connector from the lamp and remove it. Insert the new xenon D1s lamp, connect the connector, reattach the metal clip and the headlamp cover, position the panel on the wheel arch and reattach the front wheel.

Posted on 11 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulbs of the BMW 3 Series.
Replacement of the front headlight bulbs of the BMW 3 Series.
BMW Serie 3 (2012-2019 / F30, F31) In this short guide, we will see step-by-step instructions that will allow us to disassemble and replace the bulbs of the front headlight of the BMW …
Replacing Headlight Bulb on BMW 3 Series F30 - F31
Replacing Headlight Bulb on BMW 3 Series F30 - F31
BMW Serie 3 (2012-2019 / F30, F31) In today's tutorial video, you will learn how to remove and replace the low beam and high beam bulbs in the front headlight of a BMW 3 Series F30 and…
Replacing the Headlight Bulb on a BMW 3 Series
Replacing the Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today, you will see in this brief and simple guide the steps to remove and replace the headlight bulb on a BMW 3 Series. First, open the hood of your…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos