Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front turn signal bulb of the BMW 3 Series?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Light bulb

In order to replace the front turn signal bulb of the BMW 3 Series, you need to pry it out with an object so that you can remove the corresponding spotlight from its housing: once this spotlight has been removed, you can disconnect its connector, so that the bulb inside can be completely removed. After removing the old bulb, you can insert the new one, connecting its connector; finally, you can insert the headlight into its slot, securing it properly.

Posted on 10 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front turn signal bulb in the BMW E46?
How do you replace the front turn signal bulb in the BMW E46?
BMW Serie 3 (1998-2006 / E46) The turn signal bulb of a car, also known as a blinker, is among the DIY jobs that can be done in a very short time and without any difficulty if it …
Replacement of the front headlight bulb of the BMW 3 Series
Replacement of the front headlight bulb of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Following these simple steps, we will see how to disassemble and replace the low beam or high beam bulb of the front headlight of the BMW 3 Series. F…
Replacing the Low Beam Headlight Bulb on a BMW 3 Series
Replacing the Low Beam Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Here are the instructions to remove and replace the low beam headlight bulb on a BMW 3 Series. To access the low beam bulb, remove the plastic cover …

    Frequently Asked Questions

    • Serie 3 2005-2013 - What sidelights does the BMW 3 Series mount? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos