Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turn Signal Bulb in the BMW 3 Series Mirror

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Side marker bulb

Discover in this video tutorial how to remove and replace the bulb or lens of the turn signal in the external rearview mirror of the BMW 3 Series. First, remove the glass from the rearview mirror by prying it off from the sides; then take off the plastic cover of the mirror as shown in the video. At this point, use a Torx screwdriver to unscrew the screws of the turn signal lens, disconnecting the electrical connector of the bulb; now replace the lens or bulb, applying the reverse procedure for reassembly!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Turn Signal Bulb of the BMW 3 Series Side Mirror
How to Replace the Turn Signal Bulb of the BMW 3 Series Side Mirror
BMW Serie 3 (2012-2019 / F30, F31) Today, you will see the instructions to remove and replace the turn signal light of the outer mirror of the BMW 3 Series. First, move to the side and…
How to Remove the Mirror from a BMW 3 Series Side Mirror
How to Remove the Mirror from a BMW 3 Series Side Mirror
BMW Serie 3 (2012-2019 / F30, F31) Here’s how to remove the mirror from the external side mirror on a BMW 3 Series. Use a plastic or rubber-coated lever: pry between the edge of the mi…
Replace BMW E46 Mirror
Replace BMW E46 Mirror
BMW Serie 3 (1998-2006 / E46) Want to replace the mirror inside the mirror housing of a BMW? Let's see how to remove the piece from inside the mirror housing. Pry between the edge…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos