Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turn Signal Bulb of the BMW 3 Series Side Mirror

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Side marker bulb

Today, you will see the instructions to remove and replace the turn signal light of the outer mirror of the BMW 3 Series. First, move to the side and start removing the mirror glass by prying at the edges and disconnecting the connector at the back. Then, unscrew the screws of the plastic cap, removing it to access the turn signal light housing, as shown in the video. At this point, replace the turn signal bulb with a new one of the correct type and with the same base; reassemble the outer mirror.

Posted on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Turn Signal Bulb in the BMW 3 Series Mirror
How to Replace the Turn Signal Bulb in the BMW 3 Series Mirror
BMW Serie 3 (2012-2019 / F30, F31) Discover in this video tutorial how to remove and replace the bulb or lens of the turn signal in the external rearview mirror of the BMW 3 Series. Fi…
Removing and Replacing the Outer Mirror Cap of a BMW 3 Series
Removing and Replacing the Outer Mirror Cap of a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) In this brief guide, you will see the instructions to remove and replace the plastic cap of the outer mirror of the BMW 3 Series. First, get some pla…
Removing the Interior Rearview Mirror on a BMW 3 Series
Removing the Interior Rearview Mirror on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Replace the interior rearview mirror on a BMW 3 Series. Here’s how to remove it from above the front windshield. Enter the vehicle, detach the trim p…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos