Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Outside Rearview Mirror on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Side mirror

See other generations:
Video tutorial

Here are the instructions on how to remove and replace the outside rearview mirror on a BMW 3 Series. First, open the front door of the vehicle and begin removing the inner door panel by taking off the cover and unscrewing the fastening screws; disconnect the electrical connector for the window switch, as shown in the video.

Now, unscrew the internal screws of the mirror using a wrench or Torx screwdriver; disconnect the electrical connector to pull the mirror from the outside, install the new one, and then adjust its angle.


Posted on 12 August 2026 by ScegliAuto


Related tutorials

How to Replace the Outside Mirror on a BMW 3 Series?
How to Replace the Outside Mirror on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the outside mirror on a BMW 3 Series, pry off the inner cover on the door near the mirror using a tool. Under this cover, you will find th…
How to Replace the Side Mirror on a BMW 3 Series?
How to Replace the Side Mirror on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To replace the side mirror on a BMW 3 Series, you need to remove the trim along the entire panel to completely take off the door panel. This will all…
How to Remove the Exterior Rearview Mirror of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) How to remove the exterior rearview mirror of a BMW 3 Series? Let's see how to proceed: using a plastic or rubber pry tool, pry between the perimeter…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos