Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the interior rearview mirror of the BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Rearview mirror

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the interior rearview mirror of the BMW 3 Series. First, we get on board the car and start rotating the bracket of the rearview mirror to then release it, pulling strongly towards ourselves; then we disconnect the electrical connector found on the back, as shown in the video.

At this point, we remove and replace the interior rearview mirror with the new one, installing the original one; we properly fix it on the bracket and then reassemble the mirror, adjusting its angle!


Posted on 11 May 2025 by ScegliAuto


Related tutorials

Removing the Interior Rearview Mirror on a BMW 3 Series
Removing the Interior Rearview Mirror on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Replace the interior rearview mirror on a BMW 3 Series. Here’s how to remove it from above the front windshield. Enter the vehicle, detach the trim p…
Replacement of the external rearview mirror of the BMW 3 Series
Replacement of the external rearview mirror of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) These short and simple steps will show us how to disassemble and replace the external rearview mirror of the BMW 3 Series. First of all, we open the …
Removing and Replacing the Outside Rearview Mirror on the BMW 3 Series
Removing and Replacing the Outside Rearview Mirror on the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) This guide will show you how to remove and replace the outside rearview mirror on the BMW 3 Series. First, open the front door and start by removing …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos