Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the external rearview mirror of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Side mirror

These short and simple steps will show us how to disassemble and replace the external rearview mirror of the BMW 3 Series. First of all, we open the front door of the car and start disassembling and removing the door panel, removing the plastic covers and unscrewing all the fixing screws; then we remove the triangular cover of the mirror and unscrew its screws to remove it from the outside (also disconnecting the electrical connector), as shown in the video. At this point, we install the new rearview mirror and adjust the glass!

Posted on 8 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the Outer Mirror Cap of a BMW 3 Series
Removing and Replacing the Outer Mirror Cap of a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) In this brief guide, you will see the instructions to remove and replace the plastic cap of the outer mirror of the BMW 3 Series. First, get some pla…
Replacing the Glass of the Side Mirror on a BMW 3 Series
Replacing the Glass of the Side Mirror on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Here are the instructions to remove and replace the glass of the side mirror on a BMW 3 Series. First, move to the outside of the vehicle and gently …
Disassembly of the external rearview mirror of the BMW 3 Series
Disassembly of the external rearview mirror of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Following these simple steps, we will see how to disassemble and replace the external rearview mirror of the BMW 3 Series. First, we open the front d…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos