Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Rearview Mirror on BMW E46

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Rearview mirror

See other generations:
Video tutorial

Today, you will learn how to replace the interior rearview mirror on the BMW E46 model. To replace the mirror, disconnect the connector; remove the plastic cover of the mirror to access the connector and disconnect it. Then, rotate the mirror counterclockwise to remove it from its mount, pulling firmly but being careful not to damage the plastic arm. Remove the top part of the mirror by pulling it down.

Insert the mirror into the arm and connect the connector. Reattach the top and bottom plastic parts to complete the replacement.


Posted on 16 April 2026 by ScegliAuto


Related tutorials

Replace BMW E46 Mirror
Replace BMW E46 Mirror
BMW Serie 3 (1998-2006 / E46) Want to replace the mirror inside the mirror housing of a BMW? Let's see how to remove the piece from inside the mirror housing. Pry between the edge…
Replacing the Side Mirror Assembly on BMW E46
Replacing the Side Mirror Assembly on BMW E46
BMW Serie 3 (1998-2006 / E46) Let's replace the outside mirror on a BMW 3 Series. Pry between the perimeter of the mirror frame and the mirror glass. Continue to pry until the gla…
How to disassemble the interior rearview mirror of the BMW 3 Series
How to disassemble the interior rearview mirror of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Below we will see the instructions that will allow us to disassemble and replace the interior rearview mirror of the BMW 3 Series. First, we get on b…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos