Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turn Signal Bulbs on a BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Side marker bulb

In this video tutorial, you will learn how to remove and replace the front and rear turn signal bulbs on a BMW 3 Series in simple steps. First, open the hood of your car and start unscrewing the screws that secure the side turn signal housing; disconnect the electrical connector of the bulb to remove it, replacing the light with a new one as shown in the video. At this point, you can also replace the other turn signal bulbs, as well as the side and rear ones, following the video tutorial to the end for reassembly!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Turn Signal Bulbs on a BMW 3 Series?
How to Replace the Front Turn Signal Bulbs on a BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) In this tutorial, you will see how to replace the front turn signal bulbs on a BMW 3 Series, a very simple task. Before proceeding, ensure the key is…
Replacing Side Turn Signals on BMW 3 Series E46
Replacing Side Turn Signals on BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you will see simple steps to remove and replace the bulbs of the side turn signals on a BMW 3 Series E46. First, remove the t…
How to Replace the Windshield Wiper and Turn Signal Relay on a BMW 3 Series
How to Replace the Windshield Wiper and Turn Signal Relay on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, you will learn how to remove and replace the windshield wiper relay and the turn signal relay on a BMW 3 Series. First, get inside the vehicle…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos