Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight bulb

Learn how to replace the bulbs in the headlight assembly of a BMW 3 Series. Remove the cover located in the front wheel well (if necessary, remove the trim around the headlight) and unscrew the retaining pins inside (use a socket wrench or cordless drill). Disconnect the inspection covers of the front headlight and remove the bulbs if damaged. Insert the new bulbs into the front headlight, secure with the covers, and then reattach the plastic covers of the wheel well. Test the proper operation of the front lights.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Bulbs
Replacing Front Bulbs
BMW Serie 3 (2005-2013 / E91, E90, E92) Headlight bulbs, huh? Let's go through the process of removing the bulbs from the front headlight of a BMW 3 Series. Lift the hood, and locate the in…
Removing the Front Headlight from the BMW 3 Series
Removing the Front Headlight from the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This brief guide shows the steps to remove and replace the front headlight of the BMW 3 Series, following the instructions below. First, open the hoo…
How to Change Parking Light on BMW 3 Series
How to Change Parking Light on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Want to replace the bulbs in the headlights of your BMW 3 Series? Let's see how to remove them from inside the front headlights. First, open the hood…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos