Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate the sensitivity of the automatic headlights on a BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight

See other generations:
Video tutorial

In this video we see how to set the sensitivity of the automatic headlights on a BMW 3 Series E90 version: we will have to use the lever of the left indicator to go to the settings, then scrolling down we will find the adjustment for the automatic lights.

From here we can choose the sensitivity of the light sensor, in order to switch from the Halo ring to the Xenon lights.

In the example we see on the display, we see that they have set the lowest sensitivity, which means that it must be very dark before the lights switch to Xenon; there are three possible sensitivities to choose from, each a little more sensitive to light.


Posted on 20 May 2025 by ScegliAuto


Related tutorials

Adjusting the Headlights of a BMW E90 Series 3
Adjusting the Headlights of a BMW E90 Series 3
BMW Serie 3 (2005-2013 / E92, E90, E91) The video shows how to adjust the headlights of a BMW E90 Series 3. It is a very simple operation that can be done using the lines of your garage doo…
Replacing the Front Fog Lights on the BMW 3 Series
Replacing the Front Fog Lights on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) This guide will show you how to remove and replace the headlights and front fog lights on the BMW 3 Series. First, lift the vehicle and remove the fr…
Resetting the BMW 3 Series E90 Light Bulb Warning Light
Resetting the BMW 3 Series E90 Light Bulb Warning Light
BMW Serie 3 (2005-2013 / E92, E90, E91) Today, we will see in this video tutorial how to reset the light bulb warning light in a BMW 3 Series E90 by following these simple steps. First, get…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos