Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the BMW 3 Series E90 Light Bulb Warning Light

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Warning light – error code

Today, we will see in this video tutorial how to reset the light bulb warning light in a BMW 3 Series E90 by following these simple steps. First, get in the vehicle and turn on the ignition. Then, use the arrows on the left stalk (the turn signal lever) to scroll to the bulb warning message. At this point, press and hold the center button to reset the light; this will also allow you to reset other warnings, such as oil and tire pressure.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Interior Light Fixture on the BMW 3 Series E90
Removing the Interior Light Fixture on the BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you will see the steps to remove and replace the interior light fixture along with the bulbs on the BMW 3 Series E90. First, …
Reset Tire Pressure Light on BMW 3 Series E90
Reset Tire Pressure Light on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you will learn how to reset the tire pressure light on a BMW 3 Series E90. Before performing the reset procedure, ensure that…
How to Reset the Oil Change Service Light on BMW 1 Series E87 - 3 Series E90
How to Reset the Oil Change Service Light on BMW 1 Series E87 - 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) Discover how to reset the oil change service light on the BMW 3 Series E90 and 1 Series E87 by following the instructions below. First, get in the ve…

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos