Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Headlight adjustment of a BMW E90 3 Series

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Headlight
Operation: Headlight adjustment of a BMW E90 3 Series

The video shows how to adjust the headlights of a BMW E90 3 Series. It's a very simple operation that can be done using the lines of your garage door as a reference. Use masking tape to mark the position of the headlights before adjusting the headlights. To adjust them according to your needs, open the bonnet and adjust the headlight regulators with a 6 mm Allen key (or, alternatively, a screwdriver). Turn the key counterclockwise to raise the headlights or clockwise to lower them. Carry out this operation on all the headlights that you want to adjust.


Posted on 20 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the type of position light bulb on the BMW 3 Series E90? Read Answer
    • Serie 3 2012-2019 - Is it possible to remove the lens of the headlight of the BMW 3 series F31? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos