Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on the BMW 3 Series E90

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight

In this video tutorial, you will learn how to remove and replace the front headlight on the BMW 3 Series E90-E91, following the instructions below. First, remove the front bumper; to do this, take off the lower cover by unscrewing all the screws. Next, unscrew the screws located above the bumper and on both sides of the wheel wells, as shown in the video. Then, unscrew the screws of the front headlights and disconnect the electrical connectors of the bulbs to remove them; finally, reassemble everything by applying the reverse procedure!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a BMW 3 Series E90
How to Replace the Headlight Bulb on a BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you will learn how to replace the headlight bulb on a BMW 3 Series E90. First, lift the vehicle and turn the wheel fully to t…
Replacing Angel Eye Bulb on BMW 3 Series E90
Replacing Angel Eye Bulb on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In today's tutorial video, you will learn how to remove and replace the angel eye headlight bulb on a BMW 3 Series E90. To access the headlight bulb,…
Replacing the Rear Headlight Bulb on BMW 3 Series E90
Replacing the Rear Headlight Bulb on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, you will learn how to remove and replace the rear headlight bulb on a BMW 3 Series E90. First, open the trunk and remove the side cove…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos