Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the front bumper of the BMW 3 Series g21?

Model: BMW Serie 3 G20 - Years 2019-2026
Part: Front bumper

Certain jobs, such as the one mentioned above, are increasingly being carried out not so much to repair damage or completely replace that part of the bodywork, but to install a replacement with more sporty lines and a different look. Regarding the BMW 3 Series g21, we can take inspiration from the video tutorial available here, in which the work is carried out on a BMW 3 Series g20, but the operational process to be followed is practically identical. It starts with removing the wheel arches, so as to reach the rear pins of the bumper, then all those present in the lower band are unscrewed and finally the inner piece is pulled away from the bodywork, not forgetting to disconnect the rear electrical connectors.

Posted on 8 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on BMW 3 Series
How to Remove the Front Bumper on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How to remove the front bumper on BMW 3 Series? It's easy. Lift the hood and secure it. Then, use a plastic or metal pry tool to remove the retaining…
How to Remove the Front Bumper of the BMW 3 Series?
How to Remove the Front Bumper of the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To replace the front bumper of the BMW 3 Series, use a thin object to pry off all the trim pieces and grilles located in front of the bumper. Once th…
How to Replace the Horn on a BMW 3 Series
How to Replace the Horn on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) In today's tutorial video, you will see how to remove and replace the horn on a BMW 3 Series, following the instructions below. First, remove the fro…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos