Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the BMW 3 Series?

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Front bumper

See other generations:
Video tutorial

To replace the front bumper of the BMW 3 Series, use a thin object to pry off all the trim pieces and grilles located in front of the bumper. Once these trims are removed, you will have access to all the screws underneath, which can then be loosened.

Next, proceed to unscrew the bolts located at the bottom of the bumper. This will allow the bumper to be completely removed from its housing so that it can be replaced with a new one.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper on BMW 3 Series
How to Remove the Front Bumper on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How to remove the front bumper on BMW 3 Series? It's easy. Lift the hood and secure it. Then, use a plastic or metal pry tool to remove the retaining…
How to Replace the Horn on a BMW 3 Series
How to Replace the Horn on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) In today's tutorial video, you will see how to remove and replace the horn on a BMW 3 Series, following the instructions below. First, remove the fro…
Replacing the Front Bumper Grille on the BMW 3 Series - M3
Replacing the Front Bumper Grille on the BMW 3 Series - M3
BMW Serie 3 (2019-2026 / G20) In this brief guide, learn how to remove and replace the front bumper grille on the BMW 3 Series, M3 version. First, open the hood of your car and st…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos