Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper Grilles on the BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Grille

The instructions in this guide will allow you to remove and replace the front bumper grilles on the BMW 3 Series. First, move to the front of the vehicle and gently detach the front grilles from the sides without damaging the bodywork; then pull the grille towards you to remove it from the housing, as shown in the video. At this point, install the new front grilles, ensuring that the internal slots and clips are in perfect condition; check for any vibrations in the grilles by following the video tutorial to the end!

Posted on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front bumper grilles of the BMW 3 Series
Replacement of the front bumper grilles of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, we will see the main steps that will allow us to disassemble and replace the front bumper grille of the BMW 3 Series. First, we open t…
How to Remove and Replace the Front Bumper Grille of the BMW 3 Series
How to Remove and Replace the Front Bumper Grille of the BMW 3 Series
BMW Serie 3 (2019-2026 / G20) This guide will help you remove and replace the front bumper grille of the BMW 3 Series. First, open the hood and unscrew all the screws on the plast…
Removing and Replacing the Front Bumper Grilles on the BMW 3 Series
Removing and Replacing the Front Bumper Grilles on the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) In this guide, learn how to remove and replace the front bumper grille on the BMW 3 Series by following these simple and quick steps. First, open the…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos