Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front bumper grilles of the BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Grille

In this guide, we will see the main steps that will allow us to disassemble and replace the front bumper grille of the BMW 3 Series. First, we open the hood of the car and start by detaching the side tabs of the two bumper grilles from the inside; we gently remove the two grilles, as shown in the video. At this point, we install the new bumper grilles, inserting them in the correct direction; make sure that the plastic supports are in good condition, in order to avoid vibrations that could lead to the grilles breaking over time.

Posted on 16 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front bumper grille of the BMW 3 Series
Replacement of the front bumper grille of the BMW 3 Series
BMW Serie 3 (2019-2026 / G20) Today's instructions will show us how to disassemble and replace the front bumper grille of the BMW 3 Series. First, we open the hood and start remov…
Installing the Front Bumper Grille on the BMW 3 Series
Installing the Front Bumper Grille on the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today, you will learn how to remove and replace the front bumper grille on the BMW 3 Series, as well as the 5 Series, in simple and quick steps. Firs…
How to Remove the Front Bumper Grille on a BMW 3 Series
How to Remove the Front Bumper Grille on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) In this guide, discover how to remove and replace the front bumper grille on a BMW 3 Series by following these simple and quick steps. First, open th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos