Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight Bulbs on BMW 3 Series E46

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Headlight bulb

In this video tutorial, learn how to replace the headlight bulbs on a BMW 3 Series E46 produced from 1998 to 2006. First, open the hood of the vehicle and locate the bulbs to be replaced behind the headlight assembly. For the high beam and low beam bulbs, the procedure is nearly identical; simply rotate the locking ring counterclockwise to remove the bulb holder and replace the bulbs. The parking lights are located above the high beam, where you just need to disconnect the plug and replace the parking light as well.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulbs on a BMW 3 Series
Replacing the Headlight Bulbs on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's replace the headlight bulbs on a BMW 3 Series. Open the hood by pulling the lever located at the bottom right of the dashboard and secure it wi…
Removing the Front Headlight from the BMW 3 Series
Removing the Front Headlight from the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This brief guide shows the steps to remove and replace the front headlight of the BMW 3 Series, following the instructions below. First, open the hoo…
How to Replace the Headlight Bulb in a BMW 3
How to Replace the Headlight Bulb in a BMW 3
BMW Serie 3 (2005-2013 / E91, E90, E92) Replace the headlight bulbs in your BMW 3 Series if they are burned out or damaged. Let's go through the disassembly. Open the hood by pulling the le…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos