Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : BMW 3 Series headlight bulb replacement

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Headlight bulb
Operation: BMW 3 Series headlight bulb replacement

Today we will see, in this short and simple guide, the steps on how to disassemble and replace the BMW 3 Series headlight bulb. First of all, we open the bonnet of our car and begin to remove the plastic bulb protection cover; then disconnect the electrical connector of the low beam bulb and release the metal clip to remove it from the light unit, as shown in the video. At this point we install the new headlight bulb, of the right type and having the same connection, reassembling it on the light and making the connection!


Posted on 16 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the BMW 3 Series parking light bulb? Read Answer
    • Serie 3 2005-2013 - What are the position bulbs of the BMW E90? Read Answer
    • Serie 3 2005-2013 - How to remove the headlight bulb of a BMW 3 Series? Read Answer
    • Serie 3 1998-2006 - How to replace the headlight bulb on a BMW 3 Series? Read Answer
    • Serie 3 2005-2013 - Where is the position light in the BMW headlight? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos