Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Headlight Bulbs on BMW 3 Series F30

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Headlight bulb

Remove the front headlight bulbs? Let's see how to remove the front headlight bulbs on the BMW 3 Series. Turn the front wheel inward, locate the cover cap at the back of the fender liner. Disconnect the cover at the back of the fender liner: you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulbs using a screwdriver. Install the new bulbs (always the correct type and size) and insert the bulb holder into the headlight housing. Cover the back of the headlight with the appropriate plastic cover. After installing the bulbs, all that's left is to operate the switch.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Headlight of a BMW 3 Series
Removing the Rear Headlight of a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) How do you remove the rear headlight of a BMW? Let's look at removing the rear headlight of a BMW 3 Series. Lift the trunk of the car and secure it. …
Replacement of the front headlight bulbs of the BMW 3 Series.
Replacement of the front headlight bulbs of the BMW 3 Series.
BMW Serie 3 (2012-2019 / F30, F31) In this short guide, we will see step-by-step instructions that will allow us to disassemble and replace the bulbs of the front headlight of the BMW …
Where to Find the Fuses in the BMW 3 Series F30
Where to Find the Fuses in the BMW 3 Series F30
BMW Serie 3 (2012-2019 / F30, F31) To locate the box containing all the fuses in your BMW 3 Series F30 (2012-2019), follow these instructions carefully. First, park your BMW 3 Series F…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos