Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the headlight bulb of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight bulb

These short and simple instructions will guide us through the process of disassembling and replacing the headlight bulb of the BMW 3 Series. First, let's move to the side of the car and start by removing the plastic cover of the front fender; it may be necessary to remove the front wheel for better access. At this point, disconnect the electrical connector of the bulb to remove it, replacing it with the new original one; make the electrical connection and check its operation, finally reassembling the plastic cover!

Posted on 5 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the BMW 3 Series
Replacement of the front headlight bulb of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Following these simple steps, we will see how to disassemble and replace the low beam or high beam bulb of the front headlight of the BMW 3 Series. F…
Guide to replacing the headlight bulb of the BMW 3 Series.
Guide to replacing the headlight bulb of the BMW 3 Series.
BMW Serie 3 (2005-2013 / E91, E90, E92) Today we will see the instructions that will allow us to disassemble and replace the headlight bulb of the BMW 3 Series. First of all, let's move to …
How do you replace the headlight bulb of the BMW 3 Series?
How do you replace the headlight bulb of the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In order to replace the headlight bulb of the BMW 3 Series, you need to open the hood so that you can access the inside of the corresponding headligh…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos