Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the headlight bulb of the BMW 3 Series.

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Today we will see the instructions that will allow us to disassemble and replace the headlight bulb of the BMW 3 Series. First of all, let's move to the side of the car and start by removing the cover of the front fender, thus accessing the back of the headlight; then disconnect the electrical connector and unhook the low beam bulb to remove it, as shown in the video.

At this point, install the new bulb, of the right type and with the same attachment; insert it in the correct direction and finally reassemble the plastic cover of the front fender.


Posted on 12 December 2024 by ScegliAuto


Related tutorials

Guide to Replacing the Headlight Bulb on the BMW 3 Series
Guide to Replacing the Headlight Bulb on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Below are step-by-step instructions on how to remove and replace the headlight bulb on the BMW 3 Series. To access the headlight bulb, you will need …
Replacing the Headlight Bulb on a BMW 3 Series
Replacing the Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today, you will see in this brief and simple guide the steps to remove and replace the headlight bulb on a BMW 3 Series. First, open the hood of your…
How to Replace the Headlight Bulb on a BMW 3 Series
How to Replace the Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the headlight bulb on a BMW 3 Series, loosen the screws that secure the inner fender panel near the bulb to be replaced. Once the panel is…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos