Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Headlight Bulb on the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight bulb

Below are step-by-step instructions on how to remove and replace the headlight bulb on the BMW 3 Series. To access the headlight bulb, you will need to remove the plastic cover located in the front wheel well, removing the wheel if necessary; then disconnect the metal clip and unplug the xenon bulb's electrical connector, as shown in the video. At this point, install the new low beam bulb of the correct type and with the same base; connect it and reassemble everything, following the video tutorial to the end!

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a BMW 3 Series?
How to Replace the Headlight Bulb on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the headlight bulb on a BMW 3 Series, open the hood to access the components in the engine compartment. Here, you can detach the inner cov…
How to replace the headlight bulb on the BMW 3 Series?
How to replace the headlight bulb on the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To replace the headlight bulb on the BMW 3 Series, open the hood to access the components in the engine compartment. Here, you will find the bulb, wh…
How to replace the front headlight bulb of the BMW 3 Series
How to replace the front headlight bulb of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) The steps to replace the left front headlight bulb of the BMW 3 Series are: - lift the vehicle; - remove the left front wheel; - remove the cover on …

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos