Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb on the BMW 3 Series?

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Headlight bulb

See other generations:
Video tutorial

To replace the headlight bulb on the BMW 3 Series, open the hood to access the components in the engine compartment. Here, you will find the bulb, which must be disconnected from the corresponding connector by completely removing it from its socket.

Once the old bulb is freed from the connector, connect the new one to the connector; after it is connected, insert the bulb back into its socket and then close everything with the inner panel.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a BMW 3 Series
How to Replace the Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the headlight bulb on a BMW 3 Series, remove the bolts securing the front wheel corresponding to the bulb you need to replace. Once the wh…
Remove Front Headlight Bulb on BMW 3
Remove Front Headlight Bulb on BMW 3
BMW Serie 3 (2005-2013 / E92, E90, E91) Remove the front headlight bulb from a BMW 3? Let's go through the process of removing the damaged bulb. Open the hood and lift it. Locate the headli…
Replacing the Low Beam Headlight Bulb on a BMW 3 Series
Replacing the Low Beam Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Here are the instructions to remove and replace the low beam headlight bulb on a BMW 3 Series. To access the low beam bulb, remove the plastic cover …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos