Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Low Beam Headlight Bulb on a BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Headlight bulb

Here are the instructions to remove and replace the low beam headlight bulb on a BMW 3 Series. To access the low beam bulb, remove the plastic cover located in the front wheel well. Next, disconnect the clip and the electrical connector from the bulb to remove it from the headlight assembly, as shown in the video. Now, install the new low beam bulb by connecting it, and repeat the same process to replace the high beam bulb!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulb on BMW 3 Series F30 - F31
Replacing Headlight Bulb on BMW 3 Series F30 - F31
BMW Serie 3 (2012-2019 / F30, F31) In today's tutorial video, you will learn how to remove and replace the low beam and high beam bulbs in the front headlight of a BMW 3 Series F30 and…
Replacement of the front headlight bulb of the BMW 3 Series
Replacement of the front headlight bulb of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Following these simple steps, we will see how to disassemble and replace the low beam or high beam bulb of the front headlight of the BMW 3 Series. F…
Replacement of the headlight bulb for the BMW Series 3.
Replacement of the headlight bulb for the BMW Series 3.
BMW Serie 3 (2005-2013 / E91, E90, E92) In this guide, we will explore the instructions on how to disassemble and replace the low beam bulb of the front headlight of the BMW Series 3. To ac…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos