Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight bulb

To replace the headlight bulb on a BMW 3 Series, loosen the screws that secure the inner fender panel near the bulb to be replaced. Once the panel is removed, locate the protective cover inside the headlight assembly. Unscrew the screws holding the cover in place to remove it, and then pull the bulb out of its socket by disconnecting the connector. At this point, connect the new replacement part and insert it back into its socket.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a BMW 3 Series
How to Replace the Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the headlight bulb on a BMW 3 Series, remove the bolts securing the front wheel corresponding to the bulb you need to replace. Once the wh…
Replacement of the front headlight bulb of the BMW 3 Series
Replacement of the front headlight bulb of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Following these simple steps, we will see how to disassemble and replace the low beam or high beam bulb of the front headlight of the BMW 3 Series. F…
How to replace the front headlight bulb of the BMW 3 Series
How to replace the front headlight bulb of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today we will explain how to replace the headlight bulb of the BMW 3 Series model E92, produced from 2005 to 2013. To replace the bulb, we need to op…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos