Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 3
  6. : Headlight lights replacement on BMW 3

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E90, E91, E92 - Years 2005-2013
Part: Headlight bulb
Operation: Headlight lights replacement on BMW 3

Are the BMW 3 Series headlight bulbs burned out? Let's see how they disassemble. We open the front hood by pulling the lever at the bottom of the dashboard, let's secure it with the rod. We raise the front hood. We remove the large headlight cover with a screwdriver (placed in the back of the headlight). We will find the bulbs with metal hooks; we take out the lamp holders from the headlight and we go to extract the damaged bulbs with the help of a screwdriver. We assemble the new bulbs and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We mount the BMW headlight cover.


Posted on 7 December 2023 by ScegliAuto



Change the BMW headlight bulb 3
BMW Serie 3 (2005-2013 / E90, E91, E92) Does the headlight of our BMW 3 Series have burnt out bulbs? Let's see how they change inside the lighthouse. We disassemble the front wheel, remove
Replace the headlight bulbs on BMW 3 Series
BMW Serie 3 (2005-2013 / E90, E91, E92) We replace the damaged headlight bulbs of a BMW 3 Series. Let's see the replacement. With a screwdriver we detach the plastic covering in the lower p
How to install angel eyes lights in a BMW?
BMW Serie 3 (1998-2006 / E46) The so-called angel eyes lights are unique-shaped position bulbs used very frequently on BMW cars. There are two ways to install these lights: access

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the BMW 3 Series parking light bulb? Read Answer
    • Serie 3 2005-2013 - What are the position bulbs of the BMW E90? Read Answer
    • Serie 3 2005-2013 - How to remove the headlight bulb of a BMW 3 Series? Read Answer
    • Serie 3 1998-2006 - How to replace the headlight bulb on a BMW 3 Series? Read Answer
    • Serie 3 2005-2013 - Where is the position light in the BMW headlight? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos