Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Replacement of front bulbs

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Headlight bulb
Operation: Replacement of front bulbs

Ko headlight bulbs? We see the disassembly of the bulbs in the headlight of a BMW 3 Series. We lift the front hood, we find the inspection cap of the headlight (upper part of the headlight). Once here, we will find the bulbs with metal hooks; we disassemble the damaged bulbs with the help of a screwdriver. We assemble the new bulbs and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We always close the lighthouse with the safety cap in order not to risk the integrity of the bulbs. We turn on the lights of the headlights at the end of the assembly in order to check their operation.


Posted on 8 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the BMW 3 Series parking light bulb? Read Answer
    • Serie 3 2005-2013 - What are the position bulbs of the BMW E90? Read Answer
    • Serie 3 2005-2013 - How to remove the headlight bulb of a BMW 3 Series? Read Answer
    • Serie 3 1998-2006 - How to replace the headlight bulb on a BMW 3 Series? Read Answer
    • Serie 3 2005-2013 - Where is the position light in the BMW headlight? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos