Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Low Beam Bulb on a BMW F31

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

In this video, you will learn how to replace the low beam bulbs on your BMW F31. Start by going to the front wheel well, and you will see a cover behind the headlight (shown at minute 0:25). Open it by lowering the two plastic clips at the top. At this point, you will find the cap that covers the low beam bulbs: rotate it to remove it. Now you can access the bulb.

Disconnect the wire and release the bulb to remove it. Now you can insert the new bulb; reconnect the wire to the vehicle's electrical system, close the cap, and reposition the cover in its place.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

Replacing the Low Beam Headlight Bulb on a BMW 3 Series
Replacing the Low Beam Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Here are the instructions to remove and replace the low beam headlight bulb on a BMW 3 Series. To access the low beam bulb, remove the plastic cover …
Replacement of the headlight bulb for the BMW Series 3.
Replacement of the headlight bulb for the BMW Series 3.
BMW Serie 3 (2005-2013 / E92, E90, E91) In this guide, we will explore the instructions on how to disassemble and replace the low beam bulb of the front headlight of the BMW Series 3. To ac…
How to Replace the Headlight Bulb on a BMW 3 Series F31
How to Replace the Headlight Bulb on a BMW 3 Series F31
BMW Serie 3 (2012-2019 / F31, F30) Today, you will see the instructions to remove and replace the low beam bulb of the front headlight on a BMW 3 Series F31. First, remove the wheel on…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos