Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light Bulbs on the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Light bulb

Follow these instructions to remove and replace the bulbs and housing of the third brake light on the BMW 3 Series. First, open the trunk or access the rear of the vehicle and start removing the plastic cover of the third brake light. Then, disconnect the third brake light housing by unplugging the power connector, as shown in the video. At this point, replace the bulbs if necessary or the entire brake light assembly, applying the reverse procedure for reassembly!

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Third Brake Light on BMW 3 Series E92
Removing the Third Brake Light on BMW 3 Series E92
BMW Serie 3 (2005-2013 / E91, E90, E92) In today's tutorial video, you will learn how to remove the third brake light on a BMW 3 Series E92. First, access the rear of the car and detach the…
How to Remove the Headliner in a BMW 3 Series?
How to Remove the Headliner in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to remove the headliner from a BMW 3 Series E90, a very simple task. To do this, you will only need a flathead scr…
How to Disable the Start&Stop System on the BMW 3 Series
How to Disable the Start&Stop System on the BMW 3 Series
BMW Serie 3 (2019-2026 / G20) Today's instructions will show you how to manually disable the Start&Stop system on the BMW 3 Series by following these simple steps. First, get in t…

    Frequently Asked Questions

    • Serie 3 2005-2013 - What sidelights does the BMW 3 Series mount? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos