Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Rear Light on BMW 3

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Tail light

Remove the rear light on a BMW 3 Series to replace it or to change the bulbs. Let's see how to disassemble the light. Lift the trunk lid, remove the plastic cover panel next to the light (unscrew the securing screws). Once the plastic cover is removed, unscrew the securing screw of the rear light. Prepare to replace the damaged bulbs with new ones in the light or the light itself (same size and voltage). Mount the light onto the car's body, screw in the screws, and secure the plastic. Test the proper functioning of the bulbs installed in the light.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear lights of the BMW 3 Series
Replacement of the rear lights of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In this guide, we will see the instructions that will allow us to disassemble and replace the rear lights of the trunk door of the BMW 3 Series. Firs…
How to replace the rear headlight of a BMW 3 Series?
How to replace the rear headlight of a BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) To replace the rear light of a BMW 3 Series, open the rear hatch and locate the mounting screws around the perimeter of the light. Use an appropriate…
How to replace the rear light of the BMW 3 Series
How to replace the rear light of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) If the rear position light bulb of the BMW 3 Series burns out, we must proceed with its replacement as soon as possible, for our safety and that of o…

    Frequently Asked Questions

    • Serie 3 1990-2001 - How do you remove the brake light switch on the BMW 3 Series E36? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos