Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Turn Signal Bulb Replacement

Model: BMW Serie 3 E36 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front turn signal bulb, located next to the headlight, you need to remove the light assembly. Open the hood and access the hole along the edge of the fender, right above the turn signal light, to insert a Phillips screwdriver and remove the securing screw of the light assembly.

Pull the light assembly forward to detach it from its housing and twist the bulb holder about 90 degrees to release it. Replace the bulb (bayonet fitting), reattach the bulb holder, and secure the light assembly back in place by tightening the corresponding screw.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Removing the Front Headrest on a BMW 3 Series
Removing the Front Headrest on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) How do you remove the front headrest from your car? Let's see how to remove the headrest from above the BMW seat. Open the door and enter the back of…
Replacement of the front coolant pipe of the BMW 3 Series 328i.
Replacement of the front coolant pipe of the BMW 3 Series 328i.
BMW Serie 3 (2005-2013 / E92, E90, E91) In a few simple steps, we will see how to disassemble and replace the front coolant tube of the BMW 3 Series 328i engine. First, open the hood of the…
Replacement of the headlight bulb for the BMW Series 3.
Replacement of the headlight bulb for the BMW Series 3.
BMW Serie 3 (2005-2013 / E92, E90, E91) In this guide, we will explore the instructions on how to disassemble and replace the low beam bulb of the front headlight of the BMW Series 3. To ac…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos