Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on BMW 3 Series F30 320i - 330i

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Air filter

In this video, you will learn how to remove and replace the engine air filter on the BMW 3 Series F30 320i - 330i in simple and quick steps. First, open the hood of your car and start by removing the air filter box cover by unfastening it from the sides, as shown in the video. Also, disconnect the mass air flow sensor connector located on the sides. At this point, remove the filter and replace it with the correct new one; insert it in the proper direction and reassemble the cover, following the video tutorial until the end!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Third Brake Light Bulb on a BMW 320i F30
How to Replace the Third Brake Light Bulb on a BMW 320i F30
BMW Serie 3 (2012-2019 / F30, F31) This guide shows how to replace the third brake light bulb on a BMW 320i F30. First, access the rear seat of the vehicle and, using a trim removal to…
Removing Timing Chain on BMW 3 Series 320i
Removing Timing Chain on BMW 3 Series 320i
BMW Serie 3 (2012-2019 / F30, F31) In this video tutorial, you will learn how to remove the timing chain from a BMW 3 Series E90 320i, gasoline model. First, open the hood and remove t…
Replacement of the intercooler sleeve of the BMW 3 Series 320i.
Replacement of the intercooler sleeve of the BMW 3 Series 320i.
BMW Serie 3 (2012-2019 / F30, F31) In this guide we will see the main instructions that will allow us to disassemble and replace the intercooler sleeve of the BMW 3 Series, in the 320i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos