Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

Model: Aprilia Scarabeo 200ie
Part: Battery

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Variator of the Aprilia Scarabeo 200ie
How to Dismantle the Variator of the Aprilia Scarabeo 200ie
Scarabeo 200ie This guide will show you the procedure to dismantle and replace the variator and belt of the Aprilia Scarabeo 200i scooter. First, place your scooter…
How to Set the Clock on an Aprilia Scarabeo 200ie?
How to Set the Clock on an Aprilia Scarabeo 200ie?
Scarabeo 200ie You can adjust the clock on an Aprilia Scarabeo 200ie by inserting the ignition key into the corresponding lock: once the panel is on, press and hold…
How to Replace the Belt on the Aprilia Scarabeo 200ie?
How to Replace the Belt on the Aprilia Scarabeo 200ie?
Scarabeo 200ie To replace the belt on the Aprilia Scarabeo 200ie, loosen the bolts securing the cover of the casing located on the right side of the bike, near the …

How to replace the spark plug on the Kymco Agility 125?

To replace the spark plug on the Kymco Agility 125, loosen the screws securing the panel located at the rear of the footwell. This panel can be removed by unscrewing the screws found inside the underseat compartment. Once the panel is detached, you will be able to locate the top of the engine cylinder, where the coil is situated. Disconnect the coil, and the spark plug underneath can be extracted using a socket wrench. Then, insert the new spark plug, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos