Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Belt on the Aprilia Scarabeo 200ie?

Model: Aprilia Scarabeo 200ie
Part:

Video tutorial

To replace the belt on the Aprilia Scarabeo 200ie, loosen the bolts securing the cover of the casing located on the right side of the bike, near the rear wheel. Once the casing is open, loosen the central pin of the variator and remove it; follow the same procedure to remove the clutch bell, so that the belt is free and can be extracted from its housing.

The new replacement part should be inserted around the variator and the clutch, then reposition the casing cover.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on the Aprilia Scarabeo 200ie?
How to Replace the Rear Brake Pads on the Aprilia Scarabeo 200ie?
Scarabeo 200ie To replace the brake pads on the Aprilia Scarabeo 200ie, first remove the fixing pins located at the top and bottom of the brake caliper. Once the pi…
How to Set the Clock on an Aprilia Scarabeo 200ie?
How to Set the Clock on an Aprilia Scarabeo 200ie?
Scarabeo 200ie You can adjust the clock on an Aprilia Scarabeo 200ie by inserting the ignition key into the corresponding lock: once the panel is on, press and hold…
How to Dismantle the Variator of the Aprilia Scarabeo 200ie
How to Dismantle the Variator of the Aprilia Scarabeo 200ie
Scarabeo 200ie This guide will show you the procedure to dismantle and replace the variator and belt of the Aprilia Scarabeo 200i scooter. First, place your scooter…

How to replace the engine oil in the Honda PCX 125 scooter?

In this tutorial, you will see how to replace the engine oil in the Honda PCX 125 scooter, a very simple and quick operation. First, ensure that the engine is cool enough, then position a container underneath the scooter, locate the drain bolt, and unscrew it with a 12mm socket. Next, remove the filter with a 17mm socket, clean it of any dirt residue, and allow all the oil in the system to drain out. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos