Do it yourself
| ||||
|
Model: Piaggio Zip
In order to install the windshield on the Piaggio Zip, you need to insert the appropriate fixing rods into their respective housings, which are located on the lower part of the front fairing. Once the supports are inserted and fixed, it will be possible to place the rubber grommets on the rods and secure them properly. These will allow you to then insert the windshield into its housing and fix it by inserting the appropriate fixing pin into each grommet. By doing so, the windshield will be locked into its housing to ensure that everything functions correctly.
Posted on 19 July 2023 by ScegliAuto
|
How to change the gearbox oil of the Piaggio Vespa Px 125 - Lml Star 125Today we will see, in this short and simple guide, how to replace the transmission oil of the Piaggio Vespa Px 125, but also of the Lml Star 125 2-stroke. First of all we put the central stand and we start to unscrew the oil vent bolt of the transmission, which we find on the right side casing; to do this we use a 10 mm socket wrench, letting the oil drain in a container for about ten minutes. At this point we unscrew the filler screw, in order to let the oil flow more quickly; then we finally top up, following the video to the end! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |