Do it yourself
Frequently asked questions about cars and motorcycles

Model: Peugeot Elyseo 50
Part:

This guide provides instructions for removing and replacing the drive belt on the Peugeot Elyseo 50 scooter. First, place the scooter on its centre stand and begin by removing the transmission cover by unscrewing the fastening screws located on the sides; then remove the fan and clutch bell by unscrewing the central nuts, as shown in the video. This will allow you to remove the variator and the drive belt, replacing it with a new original one; also replace the rollers if necessary, applying the reverse procedure!

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Elyseo 50 In this guide, follow the instructions to install the variator and the belt on the Peugeot Elyseo 50 scooter. First, place your scooter on the centre…
Elyseo 50 In this video, we will see the main instructions for removing and replacing the belt on the Peugeot Elyseo 50cc scooter, in simple and quick steps. F…
Elyseo 50 Follow this guide to dismantle and replace the variator rollers on the Peugeot Elyseo 50 scooter. First, place your scooter on the centre stand and s…

How do you reset the Oil Check light on the Sym VF 185?

In order to reset the Oil Check light on the Sym VF 185, you need to turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, you can press and hold the button located at the bottom right of the instrument panel for a few seconds. You will need to continue holding the button for a few seconds and then release it before pressing the next button. This will make the Oil Check light disappear from the instrument panel, and you can turn it off again by turning the key in the opposite direction.

Watch the video!


by ScegliAuto

More videos