Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Peugeot Elyseo 50
Part:

In this video, we will see the main instructions for removing and replacing the belt on the Peugeot Elyseo 50cc scooter, in simple and quick steps. First, place the central stand on your scooter and start by removing the transmission side cover; to do this, unscrew all the screws found on the sides. At this point, unscrew the fan nut to remove it; then remove the variator and the belt, replacing it with the new one. Clean the inside of the cover and refit the new transmission belt, applying the reverse procedure of disassembly!

Updated on 26 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Drive Belt on a Peugeot Elyseo 50
How to Replace the Drive Belt on a Peugeot Elyseo 50
Elyseo 50 This guide provides instructions for removing and replacing the drive belt on the Peugeot Elyseo 50 scooter. First, place the scooter on its centre s…
How to Install the Variator on the Peugeot Elyseo 50
How to Install the Variator on the Peugeot Elyseo 50
Elyseo 50 In this guide, follow the instructions to install the variator and the belt on the Peugeot Elyseo 50 scooter. First, place your scooter on the centre…
How to Replace the Variator and Rollers on a Peugeot Elyseo 50
How to Replace the Variator and Rollers on a Peugeot Elyseo 50
Elyseo 50 In this guide, you will see the steps to disassemble and replace the variator and rollers on the Peugeot Elyseo 50 scooter. First, place your scooter…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos