Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Peugeot Elyseo 50
Part:

In this guide, follow the instructions to install the variator and the belt on the Peugeot Elyseo 50 scooter. First, place your scooter on the centre stand and begin removing the transmission cover by taking off the fan and the clutch bell. Next, remove the belt and the variator. Now, install the new variator along with the rollers, then reassemble the transmission belt and the clutch bell. Finally, securely fasten the fan and the clutch bell with their nuts and washers, following the video tutorial to the end!

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace or Repair the Variator on the Peugeot Elyseo 50
How to Replace or Repair the Variator on the Peugeot Elyseo 50
Elyseo 50 This guide provides instructions for removing and replacing (or repairing, as needed) the variator on the Peugeot Elyseo 50 scooter. First, place the…
How to Replace the Variator and Rollers on a Peugeot Elyseo 50
How to Replace the Variator and Rollers on a Peugeot Elyseo 50
Elyseo 50 In this guide, you will see the steps to disassemble and replace the variator and rollers on the Peugeot Elyseo 50 scooter. First, place your scooter…
How to Replace the Variator Rollers on the Peugeot Elyseo 50
How to Replace the Variator Rollers on the Peugeot Elyseo 50
Elyseo 50 Follow this guide to dismantle and replace the variator rollers on the Peugeot Elyseo 50 scooter. First, place your scooter on the centre stand and s…

How to Replace the Air Filter on a Harley Davidson Dyna?

To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel tank. Once the cover is removed, you will locate the filter underneath: it must be removed from its housing by unscrewing the fastening screws and sliding it out from its compartment. After the old filter has been removed, position the new replacement part, securing it in place with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos