|
Do it yourself
| |||
| ||||
How to Replace the Brake Fluid on a Peugeot Citystar 125?
Model: Peugeot Citystar 125
Video tutorial
To replace the brake fluid on a Peugeot Citystar 125, you need to connect the tube to the corresponding brake caliper: this will allow you to pump the brake lever, expelling all the old brake fluid from the braking system. Once the fluid has been expelled, disconnect the tube and close the brake caliper again; then, you can loosen the screws that secure the small cap next to the brake lever. Here, you can add the necessary amount of brake fluid, closing the cap afterwards.
Updated on 6 August 2026 by ScegliAuto
Related tutorials
Citystar 125
To top up the brake fluid on the Peugeot Citystar 125, loosen the two screws securing the rectangular cover next to the knob on the right of the stee…
Citystar 125
To top up the brake fluid on the Peugeot Citystar 125, cover the handles and levers with a cloth to prevent them from getting dirty with oil. Next, l…
Citystar 125
To change the engine oil of the Peugeot Citystar 125, remove the oil drain plug located at the bottom of the bike between the stand and the rear whee…
|
How to Set the Clock on the Kymco Agility?
To adjust the clock on the Kymco Agility, insert the key into the ignition to turn on the dashboard: once it is on, press and hold the button at the bottom left of the dashboard. You will notice that the hours will start to flash, which can be changed by repeatedly pressing the button to the right of the dashboard: once the hours are set, press the button on the left of the dashboard to adjust the minutes in the same way. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
